Hi-Lift Cast/Steel Jack

The cast and steel jack is exactly the same as the all-cast jack except that it has 4 stamped high-strength steel parts. We stamp and form the parts in-house; that allows us to offer the jack at a lower price, yet we still maintain the rigid quality standards that every Hi-Lift product must meet.

  • Made of Cast & Stamped Steel Parts.
  • 7000lb (3175.14kg) Tested Capacity.
  • Available in 36", 42", 48", & 60" Heights. (91, 107, 122, & 152cm)
  • Lifts, Winches, Clamps, & More.

Click on the images below to see the
Hi-Lift Cast-Steel Jack in action!


Hi-Lift Cast/Steel Jack: Lifting

Hi-Lift Cast/Steel Jack: Lifting

Hi-Lift Cast/Steel Jack: Winching

Hi-Lift Cast/Steel Jack: Post-pulling

Hi-Lift Product Testimonials

"I bought my Hi-Lift jack just for general jacking needs. I didn't know that I would need it to lift a large tractor weight into the back of a trailer to take to a salvage yard. It worked perfectly though and then was used again to lift the trailer onto the hitch of my truck. Very useful and very easy to use."

CJ in Utah